ELECTRONIC TAPE DISPENSERS

Dyspensery

ELECTRONIC TAPE DISPENSERS

Electronic Tape Dispenser for General Adhesive Tape Applications

From manual cutting to controlled, automated tape dispensing

Adhesive tapes are everywhere in modern production: from simple carton sealing to precise masking, wire harness wrapping, shielding and surface protection. Wherever tapes are being cut by hand with scissors or knives, there is hidden potential for efficiency, repeatability and safety.

The YAESU ZCUT-9GR electronic tape dispenser is a compact tabletop solution designed exactly for these everyday applications. It automatically feeds and cuts tape to pre-set lengths, so operators receive ready-to-use pieces without manual measuring or tearing. This makes it a universal tool for fast-changing production processes – whether you produce small series, work in cells, or run multiple shifts.

Thanks to its wide specification range and options for individual configuration, the ZCUT-9GR can handle many different tape types and roll dimensions on a single workstation. It is easy to set up, easy to operate and easy to maintain, making it the go-to dispenser for general adhesive tape applications across industries.

Optimize your tape cutting today

Request a proposal for the ZCUT-9GR and get support in choosing the right setup for your process.

Tapes to be used with an Electronic Tape Dispenser

The ZCUT-9GR is designed for a broad range of single-sided and double-sided materials used in assembly, packaging and industrial processes. Typical examples include:

Single-sided adhesive tapes

Packaging tapes

  • BOPP carton sealing tapes

  • PVC packaging tapes

  • Paper / kraft box sealing tapes

Wire harness and cable wrapping tapes

  • PVC insulation tapes

  • Cloth / fabric harness tapes

  • PET fleece and non-woven harness tapes

Masking tapes

  • General-purpose paper masking tapes

  • High-temperature masking tapes

  • Polyester masking tapes for powder coating

  • Polyimide (Kapton®) masking tapes for electronics and soldering

Technical and industrial tapes

  • Aluminium foil tapes for shielding and thermal management

  • Copper and other metal foil tapes (depending on thickness)

  • Filament / reinforced tapes (strapping and bundling)

  • Glass cloth and fabric tapes

  • Protective films and surface protection foils

Double-sided adhesive tapes

  • Filmic double-sided tapes for mounting and splicing

  • Tissue / non-woven double-sided tapes for general bonding and laminating

  • Cloth double-sided tapes for carpets and temporary fixing

According to the manufacturer’s specifications, the ZCUT-9GR can process a wide variety of adhesive and non-adhesive materials such as craft, PP, PVC, filament, glass cloth, double-sided, strapping, protective films and aluminium foils, as long as they are within the defined width and thickness range.

EKO-TECH can help you verify whether a specific tape grade is suitable by testing sample rolls before implementation on the production line.

ZCUT-9GR – Technical Capabilities

The YAESU ZCUT-9GR offers a wide working window for tape dimensions and programmable cutting:

  • Tape width: approx. 6 – 60 mm

  • Tape thickness: approx. 0.05 – 0.30 mm

  • Cutting length: 5 – 999 mm, with memory for multiple preset lengths

  • Maximum roll outer diameter: up to 300 mm, ideal for large production rolls and fewer changeovers

  • Feeding speed: approx. 220 mm/s, equal to about 50 pieces/minute when cutting 100 mm lengths of kraft tape

Yaesu ZCUT 9 GR
Yaesu ZCUT 9 GR

Functional features

  • Two rolls at the same time – thanks to dual photo sensors, the dispenser can cut two tapes in parallel, ideal for wire harnessing or when two operators share one device.

  • No bobbin required – rolls are placed directly in the machine, making changeovers faster and simpler.

  • Programmable memory – up to six different lengths can be stored and selected at the touch of a button, supporting flexible production.

  • Preset and loop modes – choose between cutting a pre-defined number of pieces or continuous dispensing until stopped.

  • Built-in separator and guide plate – ensures stable tape guidance and clean presentation of cut pieces.

  • Removable roller unit – enables quick cleaning and maintenance without tools, reducing downtime.

ZCUT 9GR

YAESU® ZCUT® – 9GR – ORIGINAL

The go-to universal dispenser for a broad range of tapes. It supports 6–60 mm tape widths and cutting from 5 to 999 mm. Equipped with dual photo sensors for simultaneous two-roll cutting and six memory presets for repeat settings. Designed for easy maintenance without tools

read more
ZCUT 9GR RP

YAESU® ZCUT® – 9GR-RP – ORIGINAL

Includes all ZCUT‑9GR features plus a protective backing removal function. Designed specifically for self-adhesive tapes with backing paper, offering simultaneous backing removal and automated feed control

read more

Optional liner-removal module

For double-sided tapes or materials with backing paper, the ZCUT-9GR can be combined with the optional ZCUT-9GRRP module. This unit is designed to peel off the backing paper while cutting, especially for tape-with-liner, aluminium foil and copper foil, within the standard width range.

Before implementing such applications, it is recommended to test the specific tape construction with sample rolls – EKO-TECH can coordinate this process for you.

Yaesu ZCUT 9 GR-RP

Why use an Electronic Tape Dispenser?

Switching from manual cutting to an electronic tape dispenser such as the ZCUT-9GR brings measurable benefits in daily production:

Higher productivity and throughput

  • Automatic feeding and cutting deliver ready-to-use pieces at high speed.

  • Operators no longer need to measure or tear tape manually, which significantly reduces cycle times, especially in repetitive tasks.

  • One dispenser can serve multiple workstations or operators, depending on layout and application.

Consistent quality and repeatability

  • Every piece is cut to the same length within tight tolerances, independent of the operator.

  • This consistency is important for wire harnesses, masking processes, and standardised assembly steps, improving overall process capability.

Reduced tape waste and better cost control

  • Controlled cutting reduces off-cuts and over-length pieces.

  • Less waste directly translates into lower tape consumption and more accurate cost calculations per component or per job.

Improved ergonomics and safety

  • Fewer scissors, knives and razor blades – less risk of cuts and repetitive strain injuries.

  • Operators can work more comfortably, focusing on assembly or preparation instead of manual tape handling.

Clean and organised workstations

  • Cut pieces are always presented in the same place, which supports 5S and lean manufacturing principles.

  • Less adhesive contamination on tools and surfaces, as tape is handled in a more controlled way.

Flexibility for fast-changing processes

  • With programmable lengths and easy roll changeovers, the ZCUT-9GR adapts quickly to new orders, product variants or temporary rework areas.

  • Using one universal tabletop dispenser instead of many dedicated tools simplifies training and standardisation across the plant.

EKO-TECH – Converter, Tape Expert and YAESU Partner

As EKO-TECH Sp. z o.o., we are not only a distributor of YAESU Keikogyo tape dispensers from Japan – we are also a specialist converter of adhesive tapes and technical materials for industrial customers across Europe.

What EKO-TECH offers you

  • Local partner for YAESU ZCUT® and XCUT® dispensers

    • Support in selecting the right model and configuration for your process (e.g. ZCUT-9GR for general tapes, other models for extra-wide or die-cut formats).
    • Assistance with testing your tape materials on the dispenser before full implementation.

  • Tape and converting competence in one place

    • Supply of suitable single-sided and double-sided tapes for your application.
    • Converting services such as slitting, rewinding, spooling and die-cutting to prepare tapes in the most efficient form for your dispenser and process.

  • Technical support, repairs and spare parts

    • Guidance on installation, setup and everyday use of the ZCUT-9GR.
    • Repair service and original spare parts to keep dispensers running with minimal downtime.
    • Long-term partnership approach: we help you continuously optimise tape usage and workstation design.

By combining Japanese dispensing technology with European converting expertise, EKO-TECH acts as a single, responsible supplier for both the dispenser and the tape that runs through it.

A universal tabletop solution for modern tape applications

The YAESU ZCUT-9GR electronic tape dispenser is an ideal choice wherever adhesive and non-adhesive tapes are cut frequently and consistently: from packaging areas and assembly lines to wire harness shops, masking stations and surface protection processes.

With its large roll capacity, wide tape width range and programmable cutting lengths, it can replace manual tape cutting, improve ergonomics and create more stable processes. When combined with appropriate tapes and optional modules like the ZCUT-9GRRP for liner removal, it becomes a powerful, universal tool for many industrial environments.

Together with EKO-TECH as your local YAESU partner and tape converter, you receive not only the device itself, but also application know-how, tape recommendations, converting services, repairs and spare parts – everything needed to ensure that your tape dispensing solution works reliably day after day.

Ready to upgrade from manual cutting to automated tape dispensing?

Get in touch with EKO-TECH to discuss your application, test your tapes on the ZCUT-9GR and receive a tailored offer.